SPARTAN ARDUINO PLC 21 I/Os Analog / Digital

Description

Arduino PLC based details

Industrial Automation

Modular PLC
This is the first equipment based on the Arduino technology designed for professional use. This PLC has 21I/Os. It also contains several communication ports that provide more flexibility and control. The SPARTAN family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc…

Programming Software
This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free.

Instantaneous connection and coding
The PLC SPARTAN is programmed through the USB ports. This PLC can also be programmed through an Ethernet port remotely. This offers immediate access to the program, maintain and control. Also, you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Arbosx and the Touchberry Pi with the instantaneous connection.

Ethernet communication - 1		Conformity with Health, Safety, and Environmental Protection (CE) EN61010-1 \| EN61010-2-201 \| EN61131-2:2007(Clause 8: Zone A/B EMC and clause 11:LVD) \| EN61000-6-4:2007 + A1 2011 (Emissions) \| EN 61000-6-2:2005 (Immunity)
USB port (type B) communication (for uploading or debugging only) - 1		Medical Devices Directive (CE): 93/42/EEC
Serial TTL (UART) communication - 1		FCC Federal Code of Regulation (CFR) for Electronic Equipment: EMC: FCC Part 15
RS-232 communication - 1		RoHS: Directive 2002/95/EC \| Restriction of Hazardous Substances (EEE)
Half Duplex RS-485 communication - 1		UL: STD 61010-2-201 and UL STD 61010-1 \| Certified to CSA Std. C22.2 No. 61010-1 \| Certified to CSA Std. C22.2 No.61010-2-201 \| 5016476

Total Inputs	12	Total Outputs	8
Total Digital Optoisolated Inputs (7-24Vdc)	7	Digital Optoisolated Outputs (5-24Vdc)	5
Digital Optoisolated Inputs (7-24Vdc)	5	Digital Optoisolated and PWM (5-24Vdc) \| 8 bit Analog (0-10V) Outputs configurable by switch	3
Digital Optoisolated Inputs (7-24Vdc) \| can work like interrupt Inputs INT (7-24Vdc)	1	Relay Outputs (220Vac - 5A)	0
10 bit Analog Inputs (0-10V) \| Digital (5-24Vdc) Inputs configurable by software	6

Inputs notes - * From the (Xx) Digital, (Yx) can be configured as Analog (Xx = Total Digital In, Yx = Number of Analog In) * From the (Xx) Digital, (Zx) can be configured as Interrupt (Xx = Total Digital In, Zx = Number of Interrupt pins)

Single Board Computer (SBC) Microcontroller	Arduino Mega Original Board (ATmega 2560)
Flash Memory (KB)	256
Flash Memory of which used by bootloader (KB)	8
SRAM (KB)	8
EEPROM (KB)	4
Clock Speed (MHz)	16

Total Outputs	8
Digital Optoisolated Outputs (5-24Vdc)	5
Digital Optoisolated and PWM (5-24Vdc) \| 8 bit Analog (0-10V) Outputs configurable by switch	3
Relay Outputs (220Vac - 5A)	0
Output notes